koaxxa.com te connectivity introduces its next generation of rf products with koaxxa rf interconnects. this product family premiers with the koaxxa sma product line that is designed to provide fexibility and value. key features ? fully compatible with iec-169-15 standards ? designed for 0-18 ghz performance ? ability to mass customize products ? global manufacturing footprints ? large-scale manufacturing techniques ? 500 cycle mating durability quick reference guide koaxxa sma rf interconnects koaxxa sma rf interconnects
koaxxa.com koaxxa sma rf interconnects te connectivity ? utilizes tes core competencies in manufacturing such as plating, stamping, molding and assembly to lower manufacturing cost ? modular platform designed to allow for the use of common components across product types ? selective innovative plating of precious resources only where needed without degradation of performance ? inter-mateable with all sma standard interface products innovative plating features provide a cost efective, attractive, easy to use product: ? selective tin plating only in solder regions allows for easy soldering ? selective gold plating puts gold only where it is needed ? bright nickel plating provides a robust attractive surface fnish reduced utilization of precious and non-precious materials though selective plating, stamping and die casting helps decrease exposure to future material infation. center contacts are stamped to provide the right performance and enable the use of selective plating, and can be soldered for best performance, or crimped using a hand applicator. koaxxa sma applications: ? test and measurement equipment ? transmission equipment ? base station and sub system components ? smart grid meters ? antennas ? broadband communication equipment ? routers ? industrial solutions ? mobile radio handsets ? commercialized applications in mil/aero solder crimp benefts the new sma connectors are redeveloped as an extendable product platform for large-scale manufacturing and assembly automation, delivering many advantages to the customer: nickel plated tin plated gold plating tin plating koaxxa sma rf interconnects
koaxxa.com koaxxa sma rf interconnects te connectivity roct otions a iensions son re ref strit ce rit ane ce strit ce c e ce c 7.19 11.43 a ?b straight cable plug part number terminates to dimensions (mm) a b sma-ps-1a-(x) rg 402 semi-rigid, rg 402 conformable 17.32 4.85 sma-ps-1b-(x) rd316, k02252d 24.98 4.55 sma-ps-1c-(x) rg 405 semi-rigid, rg 405 conformable 18.12 3.35 sma-ps-1d-(x) rg 178, rg 196 24.98 3.86 sma-ps-1f-(x) rg 174, rg 188, rg 316 24.58 3.86 sma-ps-1g-(x) rg 58, rg 141, rg 142 22.63 6.22 (x) - (s) single pack/ (b) bulk pack in qty 50 stragt able jak part number terminates to dimensions (mm) a b sma-js-1a-(x) rg 402 semi-rigid, rg 402 conformable 16.05 4.85 sma-js-1b-(x) rd316, k02252d 23.71 4.55 sma-js-1c-(x) rg 405 semi-rigid, rg 405 conformable 16.85 3.35 sma-js-1d-(x) rg 178, rg 196 23.71 3.86 sma-js-1f-(x) rg 174, rg 188, rg 316 23.71 3.86 sma-js-1g-(x) rg 58, rg 141, rg 142 21.46 6.22 (x) - (s) single pack/ (b) bulk pack in qty 50 rgt angle able plg part number terminates to dimensions (mm) a b sma-pr-1a-(x) rg 402 semi-rigid, rg 402 conformable 8.94 4.85 sma-pr-1b-(x) rd316, k02252d 16.23 4.55 sma-pr-1c-(x) rg 405 semi-rigid, rg 405 conformable 8.94 3.35 sma-pr-1d-(x) rg 178, rg 196 16.23 3.86 sma-pr-1f-(x) rg 174, rg 188, rg 316 16.23 3.86 sma-pr-1g-(x) rg 58, rg 141, rg 142 18.43 6.22 (x) - (s) single pack/ (b) bulk pack in qty 50 blkead able jak part number terminates to dimensions (mm) a b sma-jb-1a-(x) rg 402 semi-rigid, rg 402 conformable 16.05 4.85 sma-jb-1b-(x) rd316, k02252d 23.71 4.55 sma-jb-1c-(x) rg 405 semi-rigid, rg 405 conformable 16.85 3.35 sma-jb-1d-(x) rg 178, rg 196 23.71 3.86 sma-jb-1f-(x) rg 174, rg 188, rg 316 23.71 3.86 sma-jb-1g-(x) rg 58, rg 141, rg 142 21.46 6.22 (x) - (s) single pack/ (b) bulk pack in qty 50 7.19 16.32 a ?b 6.05 10.16 a ?b a 13.40 5.84 12.40 3/8-32 unef-2a ?b 1/4-36 uns-2a
koaxxa.com koaxxa sma rf interconnects te connectivity erticastrait oar mot ack part number terminates to sma-js-p2-(x) pcb thickness 3.175 mm (.125 in.) max. (x) - (s) single pack/ (t) tray pack in qty 50 12.93 0.40 9.63 1/4 - 36 uns 2a 3.30 6.00 ?1.27 ?1.52 4x ?1.70 2x 5.08 right angle board mount jack part number terminates to sma-jr-p2-(x) pcb thickness 3.175 mm (.125 in.) max. (x) - (s) single pack/ (t) tray pack in qty 50 ?1.52 4x ?1.70 2x 5.08 15.26 12.08 1/4 - 36 uns 2a ?1.27 12.78 6.40 3.30 0.40 vertical/straight board mount jack right angle board mount jack application tooling information cable group cable description termination type crimp solder center contact outer braid center contact outer braid tooling pn 2161864-1 tooling pn 2161732-1 tooling pn 2161890-1 1a rg402 semi rigid, rg402 conformable no no yes yes 1b rd316 (double braid), k02252d yes yes optional no 1c rg405 semi rigid, rg405 conformable no no yes yes 1d rg178, rg196 no yes yes no 1f rg174, rg188, rg316 yes yes optional no 1g rg58, rg141, rg142 yes yes optional no
koaxxa.com koaxxa sma rf interconnects te connectivity tecnooy corner escritio the voltage standing wave ratio is a unit-less measure of the maximum voltage of a standing wave in the transmission line. standing waves result from the mismatched complex impedances between the connector and the cable, causing refections that sum with the input signal. 1 1.1 1.2 1.3 1.4 1.5 05 10 15 20 25 30 frequency (ghz) koaxxa sma frequency and vswr measurements vswr key vswr average plot for rg402 vswr spec limit for rg402 1.05+0.007*f(ghz) koaxxa sma product speci cations the koaxxa sma product family is qualifed per te connectivity product specifcation 108-60094. electrical low level contact resistance 15 mohm delta per eia-364-23 insulation resistance 5000 mohms per eia-364-21 withstanding voltage 750 vac (fex cable); 1000 vac (sr cable) voltage standing wave ratio 1.05+.007*f(ghz) up to 18 ghz (sr cable) mechanical sinusoidal vibration 20 gs, 10 to 2000 hz per eia-364-28, cond iv mechanical shock 100 gs per eia-364-27, cond g mating torque 0.45 n-m [4 in-lb] per eia-364-13, method a durability 500 cycles minimum per eia-364-9 environmental thermal shock 5 cycles from -55 to +85c per eia-364-32c humidity-temperature cycling 10 cycles from 25 to 65 c at 95% rh per eia-364-31b, cond iii temperature life 85c for 1000 hours per eia-364-17b mixed flowing gas 14 days mated exposure to class iia per eia-364-65a
for more information te technical support center usa: +1 (800) 522-6752 canada: +1 (905) 475-6222 mexico +52 (0) 55-1106-0800 latin/s. america: +54 (0) 11-4733-2200 germany: +49 (0) 6251-133-1999 uk: +44 (0) 800-267666 france: +33 (0) 1-3420-8686 netherlands: +31 (0) 73-6246-999 china: +86 (0) 400-820-6015 part numbers in this brochure are rohs compliant*, unless marked otherwise. *as defned www.te.com/leadfree for information on the complete te rf interconnects portfolio, including koaxxa interconnects, visit www.te.com/products/rf-interconnects te.com ? 2013 tyco electronics corporation, a te connectivity ltd. company. all rights reserved. 4-1773463-2 dtc pdf 2/2013 koaxxa, te connectivity and the te connectivity (logo) are trademarks. other logos, product and company names mentioned herein may be trademarks of their respective owners. iec is a trademark of the international electrotechnical commission. while te has made every reasonable effort to ensure the accuracy of the information in this brochure, te does not guarantee that it is error-free, nor does te make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. te reserves the right to make any adjustments to the information contained herein at any time without notice. te expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or ftness for a particular purpose. the dimensions in this brochure are for reference purposes only and are subject to change without notice. specifcations are subject to change without notice. consult te for the latest dimensions and design specifcations. s p - a m s s - a 1 - koaxxa rf interconnects confgurable part number system 1 rf connector type gender/style and body type (2 characters) terminates to (2 characters) 2 package method (1 character) series character code gender/style (1st character) 2 character code impedance terminates to character code description sma sma gender/style 1 character code 1a 50 rg402 semi rigid, rg402 conformable s single pack kit/ loose piece plug p 1b 50 rd316 (double braid), k02252d b bulk package kit jack j 1c 50 rg405 semi rigid, rg405 conformable t tray 1d 50 rg178, rg196 type 1 character code 1f 50 rg174, rg188, rg316 straight/vertical s 1g 50 rg58, rg141, rg142 right angle r p2 50 pcb through hole bulk head b 1. the standard part number confguration is shown. te connectivity offers other product confgurations that may not be shown. contact your sales representative or visit te.com for more information. 2. only the most common termination groups are shown. te connectivity offers other termination groups, please contact your sales representative or visit te.com for more information
|
